Desulfurization gypsum dryer also called gypsum dryer, drying machine is widely used in cement, mining, building materials, chemical industry, food, compound fertilizer production, etc material drying, in order to control the temperature of the dryer, in and out of the device configuration thermocouple, through the thermometer display dryer in and out of the material temperature change, in order to control the cylinder body working temperature (usually 350-380 degrees) provides the basis.
Desulfurization gypsum dryer composition:
Desulfurization gypsum dryer mainly consists of cylinder device and supporting roller device, feeding and discharge device, a transmission device and gear cover parts. (with the related auxiliary equipment: combustion chamber, feeding discharge equipment, dust collecting equipment are not belong to the scope).
Desulfurization gypsum dryer working principle
Desulfurization gypsum dryer heat source from combustion device, the dryer using concurrent heating mode. Therefore need drying of materials, from the feed box, feed slip into the barrel, is spiral copy plate to the after. Because of the dryer tilt place, and the material on the one hand in gravity and rotary action dirty back end, on the other hand material copied plate repeated start to copy, take to top up and down again and again, make the material in the cylinder is formed in uniform curtain, fully and the heat flow in the cylinder of heat as the materials and Yang Isaac, contains moisture was gradually drying, so as to achieve the purpose of drying.
Desulfurization gypsum dryer main technical parameters
Desulfurization gypsum dryer main technical parameters
model(mm) |
gradient(%)
|
speed
(r/min)
|
into the temperature (℃)
|
power
(kw)
|
production capacity (t/h)
|
weight(t)
|
Ф600x6000
|
3-5
|
3-8
|
≤700
|
3
|
0.5-1.5
|
2.9
|
Ф800x8000
|
3-5
|
3-8
|
≤700
|
4
|
0.8-2.0
|
3.5
|
Ф800x10000
|
3-5
|
3-8
|
≤700
|
4
|
0.8-2.5
|
4.5
|
Ф1000x10000
|
3-5
|
3-8
|
≤700
|
5.5
|
1.0-3.5
|
5.6
|
Ф1200x10000
|
3-5
|
3-8
|
≤700
|
7.5
|
1.8-5
|
14.5
|
Ф1200x12000
|
3-5
|
3-8
|
≤700
|
11
|
2-6
|
14.8
|
Ф1500x12000
|
3-5
|
2-6
|
≤800
|
15
|
3.5-9
|
17.8
|
Ф1800x12000
|
3-5
|
2-6
|
≤800
|
18
|
5-12
|
25
|
Ф2200x12000
|
3-5
|
1.5-6
|
≤800
|
18.5
|
6-15
|
33
|
Ф2200x18000
|
3-5
|
1.5-6
|
≤800
|
22
|
10-18
|
53.8
|
Ф2200x20000
|
3-5
|
1.5-6
|
≤800
|
30
|
12-20
|
56
|
Ф2400x20000
|
3-5
|
1.5-5
|
≤800
|
37
|
18-30
|
60
|
Ф3000x20000
|
3-5
|
1.5-5
|
≤800
|
55
|
25-35
|
78
|
Ф3000x25000
|
3-5
|
1.5-5
|
≤800
|
75
|
32-40
|
104.9
|
|